OFR Logo OFR Logo
 

OFR Globe

Intro

Function

Polarizers

Features

Magnets

Adjustable

Broadband

Fixed

244 - 505nm

505 - 700nm

700 - 925nm

925 - 1100nm

1260 - 1650nm

HoYAG(1900-2200nm)

Pol. Independent

Alignment Inst.

Body Types

HomeContactopticsFiberIsolatorsObjectivesIndexCatalog


Narrowband Adjustable Isolators (IO-λ-Series)
Catalog Number
& Polarizer
 
Aperture
Select Center
λ Between
Use Between *
Trans.
 
Isolation
Body
Type
IO-5C-λ-LP
5.0 mm
350-365 nm
350-365 nm
~ 80%
32-42 dB
 
IO-5-λ-HP
5.0 mm
244-380 nm
± 15 nm *
~ 80%
32-42 dB
inquire
 

 
IO-3C-405-PBS
3.0 mm
405 nm
400-415 nm
82 - 88%
32-42 dB
IO-3C-405-PHE
3.0 mm
405 nm
400-415 nm
74 - 77%
30-36 dB

IO-3-λ-LP
3.0 mm
380-415 nm
± 20 nm *
~ 84%
32-42 dB
IO-5-λ-LP
5.0 mm
380-415 nm
± 20 nm *
~ 84%
32-42 dB
 

IO-3-λ-LP
3.0 mm
415-450 nm
± 20 nm *
84 - 91%
32-42 dB
IO-5-λ-LP
5.0 mm
415-450 nm
± 20 nm *
84 - 91%
32-42 dB
 
IO-3-λ-HP
3.0 mm
415-450 nm
± 20 nm *
82 - 89%
32-42 dB
IO-5-λ-HP
5.0 mm
415-450 nm
± 20 nm *
82 - 89%
32-42 dB

IO-3-λ-LP
3.0 mm
450-505 nm
± 20 nm *
90 - 91%
36-39 dB
IO-5-λ-LP
5.0 mm
450-505 nm
± 20 nm *
90 - 91%
36-39 dB
 
IO-3-λ-HP
3.0 mm
450-505 nm
± 20 nm *
88 - 89%
35-42 dB
IO-5-λ-HP
5.0 mm
450-505 nm
± 20 nm *
88 - 89%
38-42 dB
IO-3-488-VHP
3.0 mm
488 nm
± 1 nm
> 91%
36-42 dB
IO-5-488-VHP
5.0 mm
488 nm
± 1 nm
> 91%
36-42 dB

IOT-any of above: Isolation is ~60 dB. Transmittance is squared.
* Do not use outside limits in " Select Center λ" column without discussing with OFR.
** Under development. Discuss with OFR.
*** Transmittance varies with wavelength. Discuss with OFR.
† When used with polarizers with > 32 dB isolation.

 

Broadband Adjustable Isolators (IO-UVS Series)
Catalog
Number
Aperture
Use/tune
between
Trans.
Isolation
Body
Type
IO-5-UVS-LP
4.7 mm
380-420 nm
75-80%*
33-40 dB
IO-5-BLG-LP
4.7 mm
420-515 nm
78-90%*
36-40 dB
           
IO-5-UVS-HP
4.7 mm
400-420 nm
75-80%*
33-40 dB
IO-5-BLG-HP
4.7 mm
420-520 nm
76-87%*
36-40 dB

* Transmittance varies with wavelength. Discuss with OFR

 

Accessories

To rotate the output polarization form the isolator you can add a 1/2 wave retarder to the output. The Zero-order retrarder is in a slip-on cell that attached to the output polarizer.

 

RZ-1/2-λ-IO

 

Types of Polarizers and Power Limits
Model
Type of Polarizer
CW
Pulsed *
Comments
LP Air-spaced Calcite
100 W/cm2
25 MW/cm2
Broadband
PBS Polarizing B/S Cube
13 W/cm2
-----
Broadband
HP Air-spaced Calcite
500 W/cm2
150 MW/cm2
Broadband
VHP Brewster’s Angle Plate
20 kW/cm2
1 GW/cm2
488, 532, 1053, 1064 only

* Pulsed measurements made at 1064 nm, 20 ns pulse width, 20 Hz.

 

Isolator Types
IO-λ Series IO-UVS, etc. Series
  • Extremely large λ selection
  • Tweakable
  • Best for single λ
  • Wide operating bands
  • Fixed polarizers
  • Best for tunable lasers

 


Body Types
Click on the appropriate link for dimensions.

 

Optics for Research · Ph 973-579-7227 · Fax 973-300-3600 · Email: info@ofr.com
THOR LABS